In this lesson we're going to look at subscriptions. Subscriptions are probably the most complicated part of writing agents, so there's a fair bit to cover. Before we get into the nitty-gritty details, we'll give a brief overview of Gall's subscription mechanics.
The basic unit of subscriptions is the path. An agent will typically define a number of subscription paths in its on-watch arm, and other agents (local or remote) can subscribe to those paths. The agent will then send out updates called %facts on one or more of its paths, and all subscribers of those paths will receive them. An agent cannot send out updates to specific subscribers, it can only target its paths. An agent can kick subscribers from its paths, and subscribers can unsubscribe from any paths.
The subscription paths an agent defines can be simple and fixed like /foo/bar/baz. They can also be dynamic, containing data of a particular atom aura encoded in certain elements of the path. These paths can therefore be as simple or complex as you need for your particular application.
Note it's not strictly necessary to define subscription paths explicitly. As long as the arm doesn't crash, the subscription will succeed. In practice, however, it's nearly always appropriate to define them explicitly and crash on unrecognized paths.
For a deeper explanation of subscription mechanics in Arvo, you can refer to Arvo's Subscriptions section.
Incoming subscriptions
Subscription requests from other entities arrive in your agent's on-watch arm. The on-watch arm takes the path to which they're subscribing, and produces a (quip card _this):
++ on-watch|= =path^- (quip card _this)...
Your agent's subscription paths would be defined in this arm, typically in a wutlus (?+) expression or similar:
?+ path (on-watch:def path)[%updates ~]............[%blah %blah ~]............[%foo @ ~]=/ when=@da (slav %da i.t.path)............[%bar %baz *]?+ t.t.path (on-watch:def path)~ .....[%abc %def ~] .....[%blah ~] .....====
Subscription paths can be simple and fixed like the first two examples above: /updates and /blah/blah. They can also contain "wildcard" elements, with an atom of a particular aura encoded in an element of the path, as in the [%foo @ ~] example. The type pattern matcher is quite limited, so we just specify such variable elements as @, and then decode them with something like (slav %da i.t.path) (for a @da), as in the example. The incoming path in this example would look like /foo/~2021.11.14..13.30.39..6b17. For more information on decoding atoms in strings, see the Strings Guide.
In the last case of [%bar %baz *], we're allowing a variable number of elements in the path. First we check it's /bar/baz/...something..., and then we check what the "something" is in another wutlus expression and handle it appropriately. In this case, it could be /bar/baz, /bar/baz/abc/def, or /bar/baz/blah. You could of course also have "wildcard" elements here too, so there's not really a limit to the complexity of your subscription paths, or the data that might be encoded therein.
Permissions can be checked as described in the previous lesson, comparing the source @p of the request in src.bowl to our.bowl or any other logic you find appropriate.
If a permission check fails, the path is not valid, or any other reason you want to reject the subscription request, your agent can simply crash. The behavior here is the same as with on-poke - Gall will send a %watch-ack card in response, which is either an ack (positive acknowledgement) or a nack (negative acknowledgement). The (unit tang) in the %watch-ack will be null if processing succeeded, and non-null if it crashed, with a stack trace in the tang. Like with poke-acks, you don't need to explicitly send a %watch-ack - Gall will do it automatically.
As well as sending a %watch-ack, Gall will also record the subscription in the sup field of the bowl, if it succeeded. Then, when you send updates out to subscribers of the path in question, the new subscriber will begin receiving them as well.
Updates to subscribers would usually be sent from other arms, but there's one special case for on-watch which is very useful. Normally updates can only be sent to all subscribers of a particular path - you can't target a specific subscriber. There's one exception to this: In on-watch, when there's a new subscription, you can send a %fact back with an empty (list path), and it'll only go to the new subscriber. This is most useful when you want to give the subscriber some initial state, which you otherwise couldn't do without sending it to everyone. It might look something like this:
:_ this:~ [%give %fact ~ %todo-update !>(`update:todo`initial+tasks)]==
Sending updates to subscribers
Once your agent has subscribers, it's easy to send them out updates. All you need to do is produce cards with %facts in them:
:_ this:~ [%give %fact ~[/some/path /another/path] %some-mark !>('some data')][%give %fact ~[/some/path] %some-mark !>('more data')]....==
The (list path) in the %fact specifies which subscription paths the %fact should be sent on. All subscribers of all paths specified will receive the %fact. Any agent arm which produces a (quip card _this) can send %facts to subscribers. Most often they will be produced in the on-poke arm, since new data will often be added in pokes.
Kicking subscribers
To kick a subscriber, you just send a %kick card:
[%give %kick ~[/some/path] `~sampel-palnet]
The (list path) specifies which subscription paths the ship should be kicked from, and the (unit ship) specifies which ship to kick. The (unit ship) can also be null, like so:
[%give %kick ~[/some/path] ~]
In this case, all subscribers to the specified paths will be kicked.
Note that %kicks are not exclusively sent by the agent itself - Gall itself can also kick subscribers under certain network conditions. Because of this, %kicks are not assumed to be intentional, and the usual behavior is for a kicked agent to try and resubscribe. Therefore, if you want to disallow a particular subscriber, your agent's on-watch arm should reject further subscription requests from them - your agent should not just %kick them and call it a day.
Outgoing subscriptions
Now that we've covered incoming subscriptions, we'll look at the other side of it: Subscribing to other agents. This is done by %passing the target agent a %watch task in a card:
[%pass /some/wire %agent [~some-ship %some-agent] %watch /some/path]
If your agent's subscription request is successful, updates will come in to your agent's on-agent arm on the wire specified (/some/wire in this example). The wire can be anything you like - its purpose is for your agent to figure out which subscription the updates came from. The [ship term] pair specifies the ship and agent you're trying to subscribe to, and the final path (/some/path in this example) is the path you want to subscribe to - a path the target agent has defined in its on-watch arm.
Gall will deliver the card to the target agent and call that agent's on-watch arm, which will process the request as described above, accept or reject it, and send back either a positive or negative %watch-ack. The %watch-ack will come back in to your agent's on-agent arm in a sign, along with the wire you specified (/some/wire in this example). Recall in the lesson on pokes, the on-agent arm starts with:
++ on-agent|= [=wire =sign:agent:gall]^- (quip card _this).....
The sign will be of the following format:
[%watch-ack p=(unit tang)]
How you want to handle the %watch-ack really depends on the particular agent. In the simplest case, you can just pass it to the on-agent arm of default-agent, which will just accept it and do nothing apart from printing the error in the %watch-ack tang if it's a nack. You shouldn't have your agent crash on a %watch-ack - even if it's a nack your agent should process it successfully. If you wanted to apply some additional logic on receipt of the %watch-ack, you'd typically first test the wire, then test whether it's a %watch-ack, then test whether it's an ack or a nack and do whatever's appropriate:
++ on-agent|= [=wire =sign:agent:gall]^- (quip card _this)?+ wire (on-agent:def wire sign)[%expected %wire ~]?+ -.sign (on-agent:def wire sign)%watch-ack?~ p.sign...(do something if ack)......(do something if nack).........
The on-agent arm produces a (quip card _this), so you can produce new cards and update your agent's state, as appropriate.
One further thing to note with subscriptions is that you can subscribe multiple times to the same path on the same ship and agent, as long as the wire is unique. If the ship, agent, path and wire are all the same as an existing subscription, Gall will not allow the request to be sent, and instead fail with an error message fed into the on-fail arm of your agent.
Receiving updates
Assuming the %watch succeeded, your agent will now begin receiving any %facts the other agent publishes on the path to which you've subscribed. These %facts will also come in to your agent's on-agent arm in a sign, just like the initial %watch-ack. The %fact sign will have the following format:
[%fact =cage]
You would typically handle such %facts in the following manner: Test the wire, test whether the sign is a %fact, test the mark in the cage, extract the data from the vase in the cage, and apply your logic. For example:
++ on-agent|= [=wire =sign:agent:gall]^- (quip card _this)?+ wire (on-agent:def wire sign)[%expected %wire ~]?+ -.sign (on-agent:def wire sign)%fact?+ p.cage.sign (on-agent:def wire sign)%expected-mark=/ foo !<(expected-type q.cage.sign)...........
Note that Gall will not allow signs to come into on-agent unsolicited, so you don't necessarily need to include permission logic in this arm.
The on-agent arm produces a (quip card _this), so you can produce new cards and update your agent's state, as appropriate.
Getting kicked
For whatever reason, the agent you're %watching might want to kick your agent from a path to which it's subscribed, ending your subscription and ceasing to send your agent %facts. To do this, it will send your agent a %kick card as described above. The %kick will come in to your agent's on-agent arm in a sign, like %watch-acks and %facts do. The %kick sign will have the following format:
[%kick ~]
Since the %kick itself contains no information, you'll need to consider the wire it comes in on to know what it pertains to. As explained previously, %kicks aren't always intentional - sometimes Gall will kick subscribers due to network issues. Your on-agent arm therefore has no way to know whether the other agent actually intended to kick it. This means your agent should almost always try to resubscribe if it gets kicked. Then, if the resubscribe %watch request is rejected with a negative %watch-ack, you can conclude that it was intentional and give up. The logic would look something like this:
++ on-agent|= [=wire =sign:agent:gall]^- (quip card _this)?+ wire (on-agent:def wire sign)[%some %wire ~]?+ -.sign (on-agent:def wire sign)%kick:_ this:~ [%pass /some/wire %agent [src.bowl dap.bowl] %watch /some/path]==.......
Leaving a subscription
Eventually you may wish to unsubscribe from a path in another agent and stop receiving updates. This is done by %passing a %leave task to the agent in question:
[%pass /some/wire %agent [~some-ship %some-agent] %leave ~]
The subscription to be ended is determined by the combination of the wire, ship and agent, so the %leave task itself always just has ~ at the end.
Example
Here we're going to give a pretty well fleshed out example. It will demonstrate both inbound and outbound subscriptions, most of the concepts we've discussed here, as well as some from the previous lesson - /sur files, mark files, and permission checks.
In previous lessons we've only dealt with things on a local ship - this example will demonstrate messages being sent over the network.
The example will be composed of two separate agents - a publisher called /app/todo.hoon and a subscriber called /app/todo-watcher.hoon, which will live on separate ships. It will be a very rudimentary To-Do app - to-do tasks will be poked into the publisher and sent out to the subscriber as %facts, which will just print them to the dojo. It will have its types defined in /sur/todo.hoon, and it will have a couple of mark files for pokes and updates: /mar/todo/action.hoon and /mar/todo/update.hoon.
Before we get into trying it out, we'll first walk through the /sur file, mark files, and each agent.
Types and marks
/sur/todo.hoon
Click to expand
|%+$ id @+$ name @t+$ task [=name done=?]+$ tasks (map id task)+$ who @p+$ friends (set who)+$ action$% [%add =name][%del =id][%toggle =id][%rename =id =name][%allow =who][%kick =who]==+$ update$% [%add =id =name][%del =id][%toggle =id][%rename =id =name][%initial =tasks]==--
This file defines most of the types for the agents. The list of to-do tasks will be stored in the state of the publisher agent as the tasks type, a (map id task), where a task is a [=name done=?]. The set of ships allowed to subscribe will be stored in friends, a (set @p), also in the publisher's state. After that, there are the head-tagged unions of accepted poke actions and updates for subscribers.
/mar/todo/action.hoon
Click to expand
/- todo|_ =action:todo++ grab|%++ noun action:todo--++ grow|%++ noun action--++ grad %noun--
This is a very simple mark file for the action type.
/mar/todo/update.hoon
Click to expand
/- todo|_ =update:todo++ grab|%++ noun update:todo--++ grow|%++ noun update--++ grad %noun--
This is a very simple mark file for the update type.
Publisher
/app/todo.hoon
Click to expand
/- todo/+ default-agent, dbug|%+$ versioned-state$% state-0==+$ state-0 [%0 =friends:todo =tasks:todo]+$ card card:agent:gall--%- agent:dbug=| state-0=* state -^- agent:gall|_ =bowl:gall+* this .def ~(. (default-agent this %.n) bowl)::++ on-init^- (quip card _this)`this::++ on-save^- vase!>(state)::++ on-load|= old-state=vase^- (quip card _this)=/ old !<(versioned-state old-state)?- -.old%0 `this(state old)==::++ on-poke|= [=mark =vase]^- (quip card _this)|^?> =(src.bowl our.bowl)?+ mark (on-poke:def mark vase)%todo-action=^ cards state(handle-poke !<(action:todo vase))[cards this]==++ handle-poke|= =action:todo^- (quip card _state)?- -.action%add?: (~(has by tasks) now.bowl)$(now.bowl (add now.bowl ~s0..0001)):_ state(tasks (~(put by tasks) now.bowl [name.action %.n])):~ :* %give %fact ~[/updates] %todo-update!>(`update:todo`[%add now.bowl name.action])====::%del:_ state(tasks (~(del by tasks) id.action)):~ :* %give %fact ~[/updates] %todo-update!>(`update:todo`action)====::%toggle:- :~ :* %give %fact ~[/updates] %todo-update!>(`update:todo`action)== ==%= statetasks %+ ~(jab by tasks)id.action|=(=task:todo task(done !done.task))==::%rename:- :~ :* %give %fact ~[/updates] %todo-update!>(`update:todo`action)== ==%= statetasks %+ ~(jab by tasks)id.action|=(=task:todo task(name name.action))==%allow`state(friends (~(put in friends) who.action))::%kick:_ state(friends (~(del in friends) who.action)):~ [%give %kick ~[/updates] `who.action]====--::++ on-watch|= =path^- (quip card _this)?+ path (on-watch:def path)[%updates ~]?> (~(has in friends) src.bowl):_ this:~ [%give %fact ~ %todo-update !>(`update:todo`initial+tasks)]====::++ on-leave on-leave:def++ on-peek on-peek:def++ on-agent on-agent:def++ on-arvo on-arvo:def++ on-fail on-fail:def--
This is the publisher agent, todo.hoon. The bulk of its logic is in its on-poke arm, where it handles the various possible actions like %adding a task, %toggleing its "done" state, %renameing a task, and so on. It also has a couple of actions for %allowing and %kicking subscribers.
Most of these cases both update the state of the agent, as well as producing %fact cards to send out to subscribers with the new data.
You'll notice it only allows these pokes from the local ship, and enforces this in on-poke with:
?> =(src.bowl our.bowl)
Additionally, you might notice the %add case in handle-poke begins with the following:
?: (~(has by tasks) now.bowl)$(now.bowl (add now.bowl ~s0..0001))
Back in lesson two, we mentioned that the bowl is only repopulated when there's a new Arvo event, so simultaneous messages from a local agent or web client would be processed with the same bowl. Since we're using now.bowl for the task ID, this means multiple %add actions could collide. To handle this case, we check if there's already an entry in the tasks map with the current date-time, and if there is, we increase the time by a fraction of a second and try again.
Let's now look at on-watch:
++ on-watch|= =path^- (quip card _this)?+ path (on-watch:def path)[%updates ~]?> (~(has in friends) src.bowl):_ this:~ [%give %fact ~ %todo-update !>(`update:todo`initial+tasks)]====
When on-watch gets a subscription request, it checks whether the requesting ship is in the friends set, and crashes if it is not. If they're in friends, it produces a %fact card with a null (list path), which means it goes only to the new subscriber. This %fact contains the entire tasks map as it currently exists, getting the new subscriber up to date.
Subscriber
/app/todo-watcher.hoon
/- todo/+ default-agent, dbug|%+$ versioned-state$% state-0==+$ state-0 [%0 ~]+$ card card:agent:gall--%- agent:dbug=| state-0=* state -^- agent:gall|_ =bowl:gall+* this .def ~(. (default-agent this %.n) bowl)::++ on-init^- (quip card _this)`this::++ on-save^- vase!>(state)::++ on-load|= old-state=vase^- (quip card _this)=/ old !<(versioned-state old-state)?- -.old%0 `this(state old)==::++ on-poke|= [=mark =vase]^- (quip card _this)?> =(src.bowl our.bowl)?+ mark (on-poke:def mark vase)%noun=/ action !<(?([%sub @p] [%unsub @p]) vase)?- -.action%sub:_ this:~ [%pass /todos %agent [+.action %todo] %watch /updates]==%unsub:_ this:~ [%pass /todos %agent [+.action %todo] %leave ~]======::++ on-watch on-watch:def++ on-leave on-leave:def++ on-peek on-peek:def::++ on-agent|= [=wire =sign:agent:gall]^- (quip card _this)?+ wire (on-agent:def wire sign)[%todos ~]?+ -.sign (on-agent:def wire sign)%watch-ack?~ p.sign((slog '%todo-watcher: Subscribe succeeded!' ~) `this)((slog '%todo-watcher: Subscribe failed!' ~) `this)::%kick%- (slog '%todo-watcher: Got kick, resubscribing...' ~):_ this:~ [%pass /todos %agent [src.bowl %todo] %watch /updates]==::%fact?+ p.cage.sign (on-agent:def wire sign)%todo-update~& !<(update:todo q.cage.sign)`this======::++ on-arvo on-arvo:def++ on-fail on-fail:def--
This is the subscriber agent. Since it's just for demonstrative purposes, it has no state and just prints the updates it receives. In practice it would keep the tasks map it receives in its own state, and then update it as it receives new %facts.
The on-poke arm is fairly simple - it accepts two pokes, to either [%sub ~some-ship] or [%unsub ~some-ship].
The on-agent arm will print whether a subscription request succeeded or failed, as well as printing a message when it gets kicked. When it receives a %fact from the publisher agent, it will just print it to the terminal with a ~& expression.
Trying it out
We're going to try this between two different ships. The first ship will be the usual fakezod. We'll add both mark files, the /sur file, and the todo.hoon agent to the %base desk of our fakezod, putting them in the following directories:
base├── app│ └── todo.hoon├── mar│ └── todo│ ├── action.hoon│ └── update.hoon└── sur└── todo.hoon
In ~zod's dojo, we can |commit %base, and then start the %todo agent:
|rein %base [& %todo]
Now we need to spin up another fake ship. We'll use ~nut in this example:
urbit -F nut
Once it's booted, we can |mount %base and then add just the update.hoon mark file, the /sur file, and the todo-watcher.hoon agent like so:
base├── app│ └── todo-watcher.hoon├── mar│ └── todo│ └── update.hoon└── sur└── todo.hoon
On ~nut we can then |commit %base, and start the %todo-watcher agent:
|rein %base [& %todo-watcher]
Now, on ~nut, let's try subscribing:
> :todo-watcher [%sub ~zod]>=%todo-watcher: Subscribe failed!
Our %todo-watcher agent tried, but received a negative %watch-ack from %todo, because we haven't yet added ~nut to the friends set of allowed ships. Let's now remedy that on ~zod:
> :todo &todo-action [%allow ~nut]>=
Let's also add a couple of to-do tasks, on ~zod:
> :todo &todo-action [%add 'foo']>=> :todo &todo-action [%add 'bar']>=
If we now check its state with +dbug, we'll see they're in the tasks map, and ~nut will also now be in the friends set:
> [ %0friends={~nut}tasks{ [ p=170.141.184.505.349.079.206.522.766.950.035.095.552q=[name='foo' done=%.n]][ p=170.141.184.505.349.079.278.538.984.166.386.565.120q=[name='bar' done=%.n]]}]> :todo +dbug>=
Let's now try subscribing again on ~nut:
> :todo-watcher [%sub ~zod]>=%todo-watcher: Subscribe succeeded![ %initialtasks{ [ p=170.141.184.505.349.079.206.522.766.950.035.095.552q=[name='foo' done=%.n]][ p=170.141.184.505.349.079.278.538.984.166.386.565.120q=[name='bar' done=%.n]]}]
As you can see, this time it's worked, and we've immediately received the initial tasks map.
Now, let's try adding another task on ~zod:
> :todo &todo-action [%add 'baz']>=
On ~nut, we'll see it has received the %fact with the new task in it:
[ %addid=170.141.184.505.349.082.779.030.192.959.445.270.528name='baz']
Let's try toggle its done state on ~zod:
> :todo &todo-action [%toggle 170.141.184.505.349.082.779.030.192.959.445.270.528]>=
~nut will again get the %fact:
[ %toggleid=170.141.184.505.349.082.779.030.192.959.445.270.528]
Recall that incoming subscriptions are stored in sup.bowl, and outgoing subscriptions are stored in wex.bowl. Let's have a look at the incoming subscription on ~zod:
> [ path=/updatesfrom=~nutduct=~[/gall/sys/req/~nut/todo /ames/bone/~nut/1 //ames]]> :todo +dbug [%incoming %ship ~nut]>=
On ~nut, let's look at the outgoing subscription:
> [wire=/todos agnt=[~zod %todo] path=/updates ackd=%.y]> :todo-watcher +dbug [%outgoing %ship ~zod]>=
Now on ~zod, let's try kicking ~nut and removing it from our friends set:
> :todo &todo-action [%kick ~nut]>=
On ~nut, we'll see it got the %kick, tried resubscribing automatically, but was rejected because ~nut is no longer in friends:
%todo-watcher: Got kick, resubscribing...%todo-watcher: Subscribe failed!
Summary
- Incoming subscription requests arrive in an agent's
on-watcharm. - An agent will define various subscription
paths in itson-watcharm, which others can subscribe to. - Gall will automatically produce a negative
%watch-ackifon-watchcrashed, and a positive one if it was successful. - Incoming subscribers are recorded in the
supfield of thebowl. on-watchcan produce a%factwith a null(list path)which will go only to the new subscriber.- Updates are sent to subscribers in
%factcards, and contain acagewith amarkand some data in avase. %facts are sent to all subscribers of the paths specified in the(list path).- A subscriber can be kicked from subscription paths with a
%kickcard specifying the ship in the(unit ship). All subscribers of the specified paths will be kicked if the(unit ship)is null. - An outgoing subscription can be initiated with a
%watchcard. - The
%watch-ackwill come back in to the subscriber'son-agentarm as asign, and may be positive or negative, depending on whether the(unit tang)is null. %kicks will also arrive in the subscriber'son-agentarm as asign. Since kicks may not be intentional, the subscriber should attempt to resubscribe and only give up if the subsequent%watch-ackis negative.%facts will also arrive in the subscriber'son-agentarm.- All such
signs that arrive inon-agentwill also have awire. - The
wirefor subscription updates to arrive on is specified in the initial%watchcard. - A subscriber can unsubscribe by passing a
%leavecard on the originalwire.
Exercises
- Have a look at the Strings Guide if you're not already familiar with decoding/encoding atoms in strings.
- Try running through the example yourself, if you've not done so already.
- Try modifying
%todo-watcherto recording the data it receives in its state, rather than simply printing it to the terminal. - If you'd like, try going back to lesson 6 (on pokes) and modifying the agents with an appropriate permission system, and also try running them on separate ships.